vector.com|Contact
Search tips

apple banana
Find rows that contain at least one of the two words.

+apple +juice
Find rows that contain both words.

+apple macintosh
Find rows that contain the word 'apple', but rank rows higher if they also contain 'macintosh'.

+apple -macintosh
Find rows that contain the word 'apple' but not 'macintosh'.

+apple ~macintosh
Find rows that contain the word 'apple', but if the row also contains the word 'macintosh', rate it lower than if row does not. This is "softer" than a search for '+apple -macintosh', for which the presence of 'macintosh' causes the row not to be returned at all.

+apple +(>turnover >strudel)
Find rows that contain the words 'apple' and 'turnover', or 'apple' and 'strudel' (in any order), but rank 'apple turnover' higher than 'apple strudel'.

apple*
Find rows that contain words such as 'apple', 'apples', 'applesauce', or 'applet'.

"some words"
Find rows that contain the exact phrase 'some words' (for example, rows that contain 'some words of wisdom' but not "some noise words").

By continuing to use this site you agree to the use of cookies. For more information and to find out how to change this click here. Accept Cookies
Please enable cookies in your browser for this website.
Search:
Advanced search

Configure I/O Port of Vector Interfaces in CANoe/CANalyzer 7.6 – 8.5

Last updated: 2019-08-02

This article shows you how I/O ports of Vector interfaces can be configured in the Vector Hardware and CANoe (and CANalyzer).

The article applies to CANoe (and CANalyzer) versions 7.6 to 8.5.
For CANoe versions ≥ 9.0 please see this article.


IOcab

Click on Configuration|I/O Hardware|Vector I/O to open the configuration menu.

Select the interface you want to configure for I/O usage:

Click Custom in the dropdown menu to configure the pins of the I/O port.

More I/O options can be configured by clicking Settings

After that, assign the physical channel of your hardware to the CANoe DAIO channel which is configured in the Vector I/O configuration in CANoe:

Usage:
After configuring, the pins are available as system variables which can be logged with the logging block. The system variables can also be used in panels, shown in the trace window, in the graphics window or in CAPL:

on key 'a'
{
  @sysvar::IO::IOCab1::DOUT0 = 1;  // sets the digital output to "1"
  @sysvar::IO::IOCab1::AOUT0 = 5;  // sets the analog output to 5 V
}



IOpiggy (VN89 and VN75 family)

Click Configuration|I/O Hardware|Vector I/O to open the configuration menu.

Select the interface you want to configure for I/O usage:

Click Custom in the dropdown menu to configure the pins of the I/O port.

More I/O options can be configured by clicking on Settings

After that, assign the physical channel of your hardware to the CANoe DAIO channel which is configured in the Vector I/O configuration in CANoe:

Usage:
After configuring, the pins are available as system variables which can be logged with the logging block. The system variables can also be used in panels, shown in the trace window, in the graphics window or in CAPL:

on key 'a'
{
  @sysvar::IO::IOpiggy1::DOUT0 = 1;  // sets the digital output to "1"
  @sysvar::IO::IOpiggy1::AOUT0 = 5;  // sets the analog output to 5 V
}



VN0601

Click Configuration|I/O Hardware|Vector I/O to open the configuration menu.

Select the interface you want to configure for I/O usage:

Click Custom in the dropdown menu to configure the pins of the I/O port.

More I/O options can be configured by clicking on Settings.

After that, assign the physical channel of your hardware to the CANoe DAIO channel which is configured in the Vector I/O configuration in CANoe:

Usage:
After configuring, the pins are available as system variables which can be logged with the logging block. The system variables can also be used in panels, shown in the trace window, in the graphics window or in CAPL:

on key 'a'
{
  @sysvar::IO::VN0600_1::DOUT = 1;    // sets the digital output to "1"
}



VN1630(A)/VN1640(A)

Click Configuration|I/O Hardware|Vector I/O to open the configuration menu.

Select the interface you want to configure for I/O usage:

Click Custom in the dropdown menu to configure the pins of the I/O port.

More I/O options can be configured by clicking Settings.

After that, assign the physical channel of your hardware to the CANoe DAIO channel which is configured in the Vector I/O configuration in CANoe:

Usage:
After configuring, the pins are available as system variables which can be logged with the logging block. The system variables can also be used in panels, shown in the trace window, in the graphics window or in CAPL:

on key 'a'
{
  @sysvar::IO::VN1600_1::DOUT0 = 1;    // sets the digital output to "1"
}


 
Article Options
2019-08-02
Views: 486