Enabling/Disabling Debug Mask
The Debug Mask
In the VXconfig software you can enable/ disable a debug mask, which can generate additional debug information on the VXconsole. To enable/disable the debug mask please perform the following steps.
Enable or disable the debug mask
Start the VXconfig software (you should have an established connection to a VX hardware) and go in the Miscellaneous menu. As you can see in the following picture, there are many properties that can be enabled (by checking the box near each property).
Depending which flags are enabled the value mask will show a different value. This is an easy way to share or save your used debug masks.
For example the value 0x21010000 and 0x100 will activate the debug masks for Target, OLDA and Radar.
Remember, all changes must be written to the VX device to become active.