Interbyte-Space Test in LIN Slave Conformance Test
According to the LIN conformance test specification bit error tests for inter-byte spaces (time between two consecutive bytes caused by interrupt latencies) have only to be performed when the inter-byte space is greater or equal to 1 bit.
If the implementation of the slave-under-test makes sure that the inter-byte space is smaller than 1 bit the conformance test module has to be configured to deselect the inter-byte space tests (see below)
If the inter-byte space tests are performed for a slave implementation where the inter-byte spaces are smaller than 1 bit these tests will fail!
Correct configuration for slave implementations with inter-byte spaces smaller than 1 bit.