Can I Use the VN8900 Eth Input together with a VN5610(A) to Send/Receive Ethernet Frames?
Yes, you can.
The VN5610(A) shall be connected to the VN8900 via USB and configured using the Vector Hardware Configuration like indicated below:
Previously, the VN5610(A) Driver should have been installed like indicated in article 1026.
Then, its channel usage shall be defined:
The VN8900 shall be connected to the PC via USB and configured using CANoe Network Hardware Configuration.Please note that with a VN8910 you need an external power supply for the VN5610(A).
If you use a VN8912, an external power supply is strongly recommended for the VN5610(A).