How to Configure the VN5640 as Media Converter
How can I configure the VN5640 as Media Converter?
- First make sure that CANoe is not using the internal VX56xx Configuration but the one of Vector HW Configuration and go to Vector HW Configuration:
- Open the Device Configuration Dialog:
- Select Media Conversion (1), select the first channel and set the used channel mode (2 and 3). Repeat 1 and 2 for the second bypass channel. The LED on device should light to confirm that the Linkup has been correctly done.
- Select the segment used for bypass, chose Bypass mode (2) and the connection will be displayed (3):