Search tips

apple banana
Find rows that contain at least one of the two words.

+apple +juice
Find rows that contain both words.

+apple macintosh
Find rows that contain the word 'apple', but rank rows higher if they also contain 'macintosh'.

+apple -macintosh
Find rows that contain the word 'apple' but not 'macintosh'.

+apple ~macintosh
Find rows that contain the word 'apple', but if the row also contains the word 'macintosh', rate it lower than if row does not. This is "softer" than a search for '+apple -macintosh', for which the presence of 'macintosh' causes the row not to be returned at all.

+apple +(>turnover >strudel)
Find rows that contain the words 'apple' and 'turnover', or 'apple' and 'strudel' (in any order), but rank 'apple turnover' higher than 'apple strudel'.

Find rows that contain words such as 'apple', 'apples', 'applesauce', or 'applet'.

"some words"
Find rows that contain the exact phrase 'some words' (for example, rows that contain 'some words of wisdom' but not "some noise words").

By continuing to use this site you agree to the use of cookies. For more information and to find out how to change this click here. Accept Cookies
Please enable cookies in your browser for this website.
Advanced search

How to Send an AUTOSAR Signal PDU with CANoe

Last updated: 2018-01-22
How can I send an AUTOSAR signal PDU with CANoe?
  • Create a new Ethernet Configuration based on ASR4_Ethernet template.
  • Attach the ARXML to the network
  • Add two nodes in the Simulation Setup and configure each node:
    • To use the AUTOSAR Interaction Layer
    • To achieve the desired Network node
  • Without CAPL: Use one of the following possibilities and change the signal while the measurement has been started:

  • With CAPL: Just change the Signal value.
  • The PDU containing the signal is sent:
Note 1:
In case another template than the ASR4_Ethernet has been used SomeIP is simulated, additionally configure the SomeIP Port to be used, in accordance to the value out of the ARXML that can be seen in the trace.

Note 2:

The PDU sending behavior is described in the ARXML. AUTOSAR offers several possibilities. However, if you do not configure the nodes to use the ASRPDUIL, then the signals are always sent “on change”.

Note 3:

Signal generators are available only for signals and not for service signals.

Article Options
Views: 6898