Diagnostics with CAPL up to CANoe 9.0 SP2

This Support Note will show you step by step how to access an ECU using the diagnostic functions and how to create tests for the diagnostic components with CANoe (and as far as possible with CANalyzer) using the CAPL programming language. These articles will only cover diagnostics on CAN, but aside from the bus specific aspects, diagnostics on FlexRay, LIN, K-Line and DoIP is quite similar.



Article ID: 1029
Last updated: 2018-07-25
Revision: 7
CANalyzer/CANoe -> Diagnostics -> CAPL -> Diagnostics with CAPL up to CANoe 9.0 SP2
https://kb.vector.com/entry/1029/