Application Bootloader Interface

Support Note:
This document gives an overview of the Application-Bootloader-Interface on both sides, the Application side and the Bootloader side and which information must be exchanged. The focus of the description of the Application software is on AUTOSAR standard (R4.x) which is widely used for automotive ECUs nowadays. Concerning the Bootloader software, this document shows the Vector proprietary and the Vector AUTOSAR Bootloader. 


Article ID: 1052
Last updated: 2020-04-17
Revision: 4
Flash Bootloader -> Basics and (Un)Installation -> Application Bootloader Interface
https://kb.vector.com/entry/1052/