How to use CANoe.Ethernet as a Tester for a Real Diagnostic Gateway

This example contains a configuration for CANoe from 8.5 on (DoIP_CAN_Gateway.cfg). It simulates an Ethernet/CAN Gateway and a CAN ECU answering to Diagnostic Requests sent by CANoe Tester on an Ethernet network using DoIP.

The diagnostic requests can manually be sent with the Diagnostic Console of CANoe.

For more details on the Ethernet Network and Diagnostic settings done in this configuration, please consult this Support Note.

 
Note:
Other Ethernet Network settings are possible. Please consult How to Use CANoe as DoIP Tester to Address my ECU.


Article ID: 1108
Last updated: 2018-09-18
Revision: 14
CANalyzer/CANoe -> Options -> Ethernet (IP) -> Example Pool -> How to use CANoe.Ethernet as a Tester for a Real Diagnostic Gateway
https://kb.vector.com/entry/1108/