Select a Signal in a Graphic Window by Clicking on its Signal Curve

Question:

When do I use the option Signal is selectable via curve, which is available for the graphic window?

Answer:

When this option is activated you can select and activate a signal by clicking on the respective curve. When pressing the <Ctrl> key you can activate several signals at the same time.

When this option is not activated, the measurement cursor is set by clicking directly on or beneath a curve.



Article ID: 1364
Last updated: 2019-06-25
Revision: 5
CANape -> Measurement and Calibration of ECUs -> Select a Signal in a Graphic Window by Clicking on its Signal Curve
https://kb.vector.com/entry/1364/