Example How to Use XCP in vTESTstudio

Support Note:

The Support Note Example How to Use XCP in vTESTstudio describes how to setup an example XCP project in vTESTstudio. Therefore the preconfigured XCP demo project in CANoe will be used to export needed data into vTESTstudio. This data will be slightly modified and can be reimported into CANoe as vTESTstudio Test Unit.

Basic knowledge how to use CANoe and vTESTstudio is required. For that you can use for instance the KnowledgeBase article Creating a Project in vTESTstudio – Step by Step



Article ID: 1521
Last updated: 2020-01-17
Revision: 4
vTESTstudio -> Diagnostics -> Example How to Use XCP in vTESTstudio
https://kb.vector.com/entry/1521/