Migration of RT-System

The Migration Wizard is not able to retrieve the channel mapping and hardware configuration from the RT-System. As a result, the devices that need to be migrated are not displayed in the Migration Wizard step Select Device. To migrate the RT-System, the channel mapping and hardware configuration should be exported in a .vaset file and imported in the Migration Wizard.

Export the hardware configuration settings as .vaset file on the RT-System:

  1. Applications
  2. Device Settings
  3. Device Order

Attention: The Device Order must be activated last, as its status is affected by changes in the Device Settings. The Device Order tab is only available when multiple devices are available of the same type (e.g. two VN5640s).

  • Add the .vaset file in the Migration Wizard with the “” button.


The assigned hardware appears in the list and can be selected.


Article ID: 1582
Last updated: 2020-01-22
Revision: 8
CANalyzer/CANoe -> Options -> Ethernet (IP) -> Migration Wizard -> Migration of RT-System