Setup DPS Using Vector Interface

To setup the DPS Flashing tool delivered by GM with Vector HW interface, you need the Vector PassThru XL Library that has to be purchased.

  1. Check in Vector Hardware Config if the used Vector Interface has got a PassThru XL Library Licence bit.


        
  2. Please make sure that you have installed the latest driver for the used interface. The driver setup can be downloaded from the Vector Download-Center:


     
  3. Download and install the Vector PassThru XL Library from our Vector Download-Center:


     
  4. Consult chap. 4 of the Getting Started manual or for new versions chap. 3 of the PassThru XL Library Installation and Quick Start Guide.



  5. Initialize the DPS to work using Vector PassThru XL Library.



Article ID: 843
Last updated: 2019-03-14
Revision: 7
Hardware -> Diagnostics -> Setup DPS Using Vector Interface
https://kb.vector.com/entry/843/