Driver for ISO CAN FD and NON ISO CAN FD Combined

For a selection of Vector network devices drivers are available with the capability that allow to switch between ISO CAN FD and NON ISO CAN FD mode using the Vector Network Hardware Configuration (starting with CANoe 9.0). There is no need to install different drivers for ISO or NON ISO CAN FD on those devices. Use the latest Vector Driver Setup (≥ 10.x.x).

For all other CAN FD capable devices the drivers for NON ISO mode are available in Vector Driver Setup 9.2.1 (see chart at bottom).

Hardware Available (latest)
driver version
Remarks
 CANcardXL  8.7.16    Not CAN FD capable
 CANcardXLe     7.9.32 
 7.9.30 
 Not CAN FD capable
 CANcaseXL     8.7.16   Not CAN FD capable
 CANboardXL     8.7.16   Not CAN FD capable
 VN1610/VN1611/1630(A)/
 VN1640(A) 
≥ 10.x.x  ISO/NON ISO CAN FD
 VN1630 log ≥ 10.x.x  ISO/NON ISO CAN FD
 VN3300/VN3600/VN7600  8.2.26   Not CAN FD capable
 VN5610/VN5610A 9.8.64   ISO/NON ISO CAN FD
 VN5640 ≥ 10.x.x  ISO/NON ISO CAN FD
 VN7570/VN7572 ≥ 10.x.x  ISO/NON ISO CAN FD
 VN7610 ≥ 10.x.x  ISO/NON ISO CAN FD
 VN7640 ≥ 10.x.x  ISO/NON ISO CAN FD
 VN8810 9.3.18  ISO CAN FD1
 VN8950 8.0.48  Not CAN FD capable
 VN8970/VN8972 ≥ 10.x.x  ISO/NON ISO CAN FD
 VX0312  9.4.28  ISO CAN FD*

*: Combined mode drivers will be available with next driver release (not necessarily next Vector Driver Setup release).
1: Combined mode driver is not planned for this device.

Vector VT System

Hardware Available (latest)
driver version
Remarks
 VT6204    ≥ 10.x.x  ISO/NON ISO CAN FD
 VT6104A2 ≥ 10.x.x  ISO/NON ISO CAN FD
 VT6306 ≥ 10.x.x  ISO/NON ISO CAN FD

2: CAN FD support is available for VT6104A module only, not for VT6104.

Non ISO package 9.2.1

Hardware Driver version included
in setup package 9.2.1
Remarks
 VN1610/VN1611/1630(A)/
VN1640(A)
 8.9.22   ISO/NON ISO CAN FD
 VN5610  9.0.20   ISO/NON ISO CAN FD
 VN7570     8.9.52   ISO/NON ISO CAN FD
 VN7572     9.1.24   ISO/NON ISO CAN FD
 VN7610     9.1.20   ISO/NON ISO CAN FD
 VN8970     8.9.52   ISO/NON ISO CAN FD
 VN8972    9.1.24  ISO/NON ISO CAN FD

All other devices do not support CAN FD, as well as those who are not marked with CAN FD (i.e. XL-series, VN8950).

The Driver Setup 9.2.1 supports the operating systems Windows 7 (32 and 64 bit) and Windows 8.1 (32 and 64 bit). All drivers of this package support NON ISO CAN FD only.

Note:

It is possible to mix ISO and NON ISO mode on hardware with combined mode drivers (marked ISO/NON ISO CAN FD). On all other hardware devices it is not possible to mix drivers for ISO and NON ISO mode.



Article ID: 873
Last updated: 2019-05-10
Revision: 19
General -> CAN FD -> Driver for ISO CAN FD and NON ISO CAN FD Combined
https://kb.vector.com/entry/873/